Moving forward, the Milesight UC511 mote will be used exclusively for control and GPIO inputs, not for pulse counting. This is due to updated specifications from the manufacturer regarding potential count discrepancies when using the device as a pulse counter over extended periods of time.
UC511 motes purchased from the meter.me shop after June 26, 2025 will come configured for control and/or GPIO input on interfaces 1 and 2. Connecting a pulse meter to interface 2 will no longer be a supported feature.
UC511 motes purchased from the meter.me shop prior to June 26, 2025 will continue to allow pulse counting on interface 2, but it is no longer recommended or supported. These motes also will not allow GPIO input on interface 2.
If you are not sure whether you need to update an existing setup that includes pulse counting on interface 2 of your UC511, please reach out to us at support@meter.me for recommendations on how to handle that particular setup.
Comments
0 comments
Please sign in to leave a comment.