How to turn on your UC511 mote using the meter.me Installer App

The meter.me Installer app uses NFC (Near Field Communication) technology to communicate with and turn on the meter.me control mote (UC511). In order to have the best results, you will need to place the NFC reader on your phone over the "Milesight" logo on the mote. 

The NFC reader location depends on the type and model of phone you have, but in general, for iPhones the placement is at the top of the device (near the camera lenses), and for Android phones, the placement is toward the center/top. 

This video explains best practices for using NFC scan with the meter.me Installer app to turn on your control mote.