How to connect your MihiHub Pro to WiFi

1. Plug the MiniHub unit into a power outlet.

• If this is the initial installation of your MiniHub Pro unit, the LED light at the top of the device will start blinking orange, indicating it is waiting for configuration
• If you need to reset the WiFi credentials on an existing MiniHub Pro unit, hold the “setup” button on the top of the unit for 5 seconds until the status LED starts blinking slowly in amber.

3. Using your phone or laptop, connect to the gateway’s wifi network labeled “MiniHubPro-xxxxxx”
4. Enter the WiFi password, which is labeled on the front of the unit
   • Please note the password is case-sensitive
5. After connecting to the MiniHub WiFi network, a configuration window will appear.
   • If the web page doesn’t open automatically, please use Firefox or Chrome browser and manually enter IP: 192.168.4.1

Please do NOT select any of the configuration settings. These have been predefined to function with meter.me equipment. Tampering with the configuration will result in connectivity failure.

6. Scroll to the bottom of the configuration page, where you will see Choose A Network. Select your local WiFi network and enter your network password.
   • After the gateway connects to your local network, you will be removed from the MiniHub WiFi network.
   • Confirm the gateway connection by checking the LED status on top of the MiniHub. A solid green light indicates a successful connection.

And that’s it! Your MiniHub gateway is now connected to your local network!